Table of Contents
Advertisement
co-k
Recording TV
programmes
using the quick
timer
QUICK TIMER
After starting recording in the normal
way, you can have the VCR stop
recording automatically after a specified
duration.
1
while recording, press QUICK TIMER once.
2
Press QUICK TIMER repeatedly to set the duration.
Each press advances the time in increments of 30 minutes.
0:00 —» 0:30 —» 1:00 —----»10:30—» 11:00
The duration decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press QUICK TIMER repeatedly to set to the new duration.
To stop recording
To stop the VCR while recording, press Ill STOP.
Tip
* You can also set the quick timer and start recording during the stop mode.
Additional Operations
Checking/
©
changing/
cancelling timer
TIMER CLEAR
settings
CURSOR
EXECUTE
MENU
Before you start...
¢ Turn on your TV and set it to the
video channel.
Ny
Press (') to turn on the VCR.
Press MENU, then select TIMER SET/CHECK.
¢ If you want to change a setting, go on to the
Bit.
'fT
next step.
ao ane
et
S: $
MON m= SAT
ca
* If you do not need to change the settings,
BVT SH 23:00
press EXECUTE, then turn off the VCR to
return to recording standby.
Press CURSOR */ ¥ to select the setting you want to change or cancel:
* To change the setting, press CURSOR @=/=
to highlight the item
you want to change, and press CURSOR 4/
to reset it.
To cancel the PDC function, turn off the
indicator.
Then, press CURSOR = repeatedly until the cursor (1) appears at the
top of the line.
* To cancel the setting, press TIMER CLEAR.
Press EXECUTE.
If any settings remain, turn off the VCR to return to recording standby.
EB: VPS/POC_
continued
Additional Operations | 47
Advertisement
Table of Contents
