Table of Contents
Advertisement
Symptom
Lamp does not light.
Lamp only lights for a short time.
PAGE 24 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
Troubleshooting ( LED Lamps)
Possible Problem
Are couplers not securely connected? Connect coupler correctly.
Is generator lamp switch turned off?
Are connectors not properly
connected?
Are any other electric appliances
(other than light tower) plugged into
power source?
Is input not 100 VAC?
Is fan inside light tower not operating
properly?
Is generator used not appropriate?
Is ambient temperature too high -
more than 104 °F (40 °C)?
TROUBLESHOOTING
Solution
Turn on switch.
Connect disconnected contactor.
Unplug all other appliances.
Make sure input is 100 VAC.
Repair or replace.
Use generator with suffi cient
capacitance.
Move lamp where there is proper
ventilation.
Advertisement
Table of Contents
