Troubleshooting - MULTIQUIP GloBug GB43LED Operation Manual

Symptom
Lamp does not light.
Lamp only lights for a short
time.
PAGE 24 — GB43LED GLOBUG • OPERATION MANUAL — REV. #3 (09/12/23)
Troubleshooting ( LED Lamps)
Possible Problem
Are couplers not securely
connected?
Is generator lamp switch
turned off ?
Are connectors not properly
connected?
Are any other electric
appliances (other than light
tower) plugged into power
source?
Is input not 100 VAC?
Is fan inside light tower not
operating properly?
Is generator used not
appropriate?
Is ambient temperature too
high - more than 104 °F (40
°C)?

TROUBLESHOOTING

Solution
Connect coupler correctly.
Turn on switch.
Connect disconnected
contactor.
Unplug all other appliances.
Make sure input is 100 VAC.
Repair or replace.
Use generator with suffi cient
capacitance.
Move lamp where there is
proper ventilation.