Adjusting The Picture Quality - Sony RDR-GX330 Operating Instructions Manual

_r_ Notes
• Angles and subtitles cannot bc changed _ith titles
recorded on this recorder.
• Slideshows made wilh a DVD camcorder can
only be played. Other play functions, such as fast
lon_ ard, cannot be used.
Noteson playingDTSsound tracks ona
CD
• When playing DTS-encodcd CDs, cxccsshc
noise will be heard from the analog stereo.jacks.
To avoid possible damage to the audio system,
the consumer should take proper precautkms
when the analog stere().jacks of Ihe recorder are
connected to an amplification system. To enjoy
DTS Digital Surround I_ playback, an external
DTS decoder must be connected to Ihe DIGITAL
OUT .jack of the recorder.
• Set the sound to "Stereo" using the AUDIO
button when you play DTS sound tracks on a CD
(page 51).
NotesonplayingDVDs witha DTSsound
track
DTS audio signals arc output only through the
DIGITAL OUT (COAXIAL) jack.
When you play a DVD with DTS sound tracks, set
"DTS" to "On" in the "Audk)" setup (page 76).
1
Press OPTIONS during playback to
select "Video Settings," and press
ENTER.
Video Settings
Select the item you want to change.
2
BNR: 2
MNR: 2
Sharpness: Off
PBVideoEquaJizer
2
3
Selectan item,andpressENTER.
The adjustment display appears.
"FNR" (l]'ame noise reduction):
Reduces noise contained in the
luminance element of the video signal.
"BNR" (block noise reduction):
Reduces "block noise" or mosaic like
patterns in the picture.
"MNR" (mosquito noise reduction):
Reduces the faint noise appearing around
the outlines of the images. The noise
reduction eft_cts are automatically
adjusted within each setting range
according to the vide() bit rate and other
factors.
"Sharpness":
Sharpens the outlines of the images.
"PB Video Fxtualizer" (Playback video
equalizer):
Adjusts the picture in greater detail.
Select an item and press ENTER.
• Contrast: changes the contrast.
• Brightness: changes the overall
brightness.
• Color: makes the colors deeper or
lighter.
• Hne: changes the color balance.
Press 4,,,/,,_ to adjust the setting, a nd
press ENTER.
The default settings are nnderliued.
"FNR": (weak) Off 1 2 3 (strong)
"BNR":(weak) Off I 2 3 (strong)
"MNR": (weak) Off 1 2 3 (strong)
"Sharpness"*: (weak) Off 1 2 3
(strong)
"PB Video Equalizer":
• Contrast: (weak)-3 _ 0 _ 3 (strong)
• Brightness: (dark) -3 _ 0 _ 3 (bright)
• Color: (light) -3 _ 0 _ 3 (deep)
• Hue:(red)-3 _ 0 _ 3(green)
Repeat steps 2 and 3 to adjust any other
items.
* '1" softens the outlines of the images. "2"
enhances the outlines and "3" enhances them
more than "2."
52