Sony RDR-GX330 Operating Instructions Manual page 67

0 Press INPUT SELECT on the remote
repeatedly to select "DV."
The front panel display changes as
follows:
channel -_ L1 _ L2 -_ DV
t
I
4
Press REC NODE on the remote
repeatedly to select the recording
mode.
The recoMing mode changes as follows:
LHQ-'_ HSP-'_SP-'_ LSP 2
SLP _-- EP _ LP _-- ESP
For details about the recoMing mode. see
page 39.
5 Press OPTIONS on the remote to
select "DV / D8 Audio Input," and
press ENTER. Then, select the setting
for the audio input.
"Stereo l" (default): RecoMs original
sound only. Normally select fills when
dabbing a DV l%rmat tape.
"Mix': Records both stereo 1 and 2.
"Stereo2 ': Records additional audio
only.
Select "Mix" or "Stereo2" only il you
have added a second audio channel when
recording wilh your digital vMeo camera.
You are ready to starl dabbing. Selecl
one of the dubbing methods on the
following pages.
6
Adjustthe dubbing picturequality and
size.
Before dubbing slarts, press OPTIONS
to select "Rec Settings," and
adjust
the
recording settings (page 42).
_r_ Notes
• YOU c;tnnot connL'ct molc than ()ILL' piL'ce of
digital video equipment te Ihe receMcr.
• You cannot control the recerder using another
device or another recerder of the same medeh
• Yeu cannot record (late, time, er the contents of
the cassette memo W onte the disc.
• lfyeu record frem i DV/Digital8 lemmt tape that
is recerded in multiple sound tracks, such as a
tape with multiple sampling frequencies 148 kHz,
44.1 kHz, or 32 kHz), no sound or an unnatural
sound will be output when playing back the
sampling frequency switch point on the disc.
• hi erder te use this recoMer's "Auto Chapter"
setting (page 68), be sure to correctly set the clock
on your digital video camera befete sheeting.
• The recorded picture may be momentarily
affected or the start and end points of a program
may be different from what yeu have set if the
source DV/Digital8 lbrmat tape is in any of the
feUowing conditions. In this case, see "Recording
frem connected equipment without a timer"
(page 48).
There is a blank space inthe rccerded pertien of
the tape.
The tape's time cede is net sequentiah
If the picture size or the recording mode on the
tape being dubbed changes.
=_
m.
=
"_" Hint
You can turn elT Ihe recorder during dubbing. The
receMer completes dubbing even after being turned
eff.
67