Adjusting The Picture Quality - Sony RDR-HX910 Operating Instructions Manual

Adjusting the picture quality

HDD + RW - RW
VR
DVD VCD
1
Press TOOLS during playback to select
"Video Settings," and press ENTER.
Video Settings
Select the item you want to change.
Y NR :
C NR :
BNR :
MNR :
DVE :
PB Video Equalizer
2
Select an item, and press ENTER.
The adjustment display appears.
"Y NR" (luminance noise reduction):
Reduces noise contained in the luminance
element of the video signal.
"C NR" (chroma noise reduction): Reduces
noise contained in the colour element of the
video signal.
"BNR" (block noise reduction): Reduces
"block noise" or mosaic like patterns in the
picture.
"MNR" (mosquito noise reduction): Reduces
the faint noise appearing around the outlines
of the images. The noise reduction effects are
automatically adjusted within each setting
range according to the video bit rate and other
factors.
"DVE" (digital video enhancer): Sharpens the
outlines of the images.
"PB Video Equalizer" (Playback video
equalizer): Adjusts the picture in greater
detail.
Select an item and press ENTER.
• Contrast: changes the contrast.
• Brightness: changes the overall brightness.
• Colour: makes the colours deeper or lighter.
• Hue: changes the colour balance.
- RW + -
R R
Video
2
2
2
1
Off
3
Press </, to adjust the setting, and
press ENTER.
The default settings are underlined.
Y NR : (weak) Off
" "
C NR : (weak) Off
" "
BNR : (weak) Off
" "
"MNR": (weak) Off
DVE *: (weak) Off
" "
PB Video Equalizer
"
• Contrast: (weak) –3 ~ 0 ~ 3 (strong)
• Brightness: (dark) –3 ~ 0 ~ 3 (bright)
• Colour: (light) –3 ~ 0 ~ 3 (deep)
• Hue: (red) –3 ~ 0 ~ 3 (green)
Repeat steps 2 and 3 to adjust any other items.
* "1" softens the outlines of the images. "2"
enhances the outlines and "3" enhances them more
than "2."
b
Notes
• If the outlines of the images on your screen become
blurred, set "BNR" and/or "MNR" to "Off."
• Depending on the disc or the scene being played, the
above BNR, MNR, Y NR, or C NR effects may be hard
to discern. And, these functions may not work with
some screen sizes.
• When using the DVE function, noise found in the title
may become more apparent. In this case, it is
recommended that you use the BNR function with the
DVE function. If the condition still does not improve,
set the DVE level to "1" or "Off."
1 2 3 (strong)
1 2 3 (strong)
1 2 3 (strong)
1 2 3 (strong)
1 2 3 (strong)
":
,continued
53