Audiosettings (Audio) - Sony RDR-GX330 Operating Instructions Manual

AudioSettings (Audio)
The "Audio' setup allows you to adjust the
sound according to Ihe playback and
connection conditions.
4
/ Press SYSTEM MENU while the
recorder is in stop mode.
2 Select "SETUP," and press ENTER.
3 Select "Audio," and press ENTER.
The "Audio" setup appears with Ihe
lk_llowing options. The default settings
are underlined.
I_ SETUP
Recor_ ng Audio Con_ec_io£
DVD Audio D_{C : Standald
Othe_SFaw Setup _D°wnm_x Dolby S_rround
Auto Stereo
This function is effecti,¢e only when "Tuner
Audio" is set to "Main."
On Receives stereo programs.
Normally select this.
Off Select this to reduce noise.
The sound changes to
monaurah
TunerAudio
Selects the sound to be recorded.
Main Records only the main
soun(l.
SAP Recnrds only the SAP
(Second Audio Program)
sonnd.
Note
If no SAP sound is received, Ihe main sound is
recorded regardless of the setting.
Audio ATT (attenuation)
If the playback sound is distorted, set this
item to "On." The recorder reduces the audio
output level.
This fnuction affects the output of the
li_)llowing jacks:
L1NE OUT R-AUD10-L jacks
On Select this when the playback
sound from the speakers is
distorted.
Off Normally select this position.
Audio Connection
The following setup items switch the method
of outputting audio signals when you connect
a component such as an amplifier (receiver)
with a digital inpnt jack.
For connection details, see "Step 3:
Connecting the Audio Cords" on page 18.
Select "Dolby Digital," "DTS," and "48kHz/
96kHz PCM" after setting "Digital Out" to
'_Onf'
If you connect a component that does not
accept the selected audio signal, a hind noise
(or no sound) will come out from the
speakers, and may alli:ct your ears or cause
speaker damage.
1 Select"Audio Connection" in "Audio,"
and press ENTER.
Audio- Audio ConnecUon
Dolby I) {1{al
u_s : off *
48kHzJ96kHz POM 48k_{z/16bit
Selecl "Digital Oul," and press ENTER.
On
Normally select this
position.
Off
The influence of the
digital circuit upon the
an:dog circuit is
minimah
Selecl "On," and press ENTER.
76