Changing The Priority Of Overlapped Settings - Sony RDR-GX330 Operating Instructions Manual

"Check Overlap":
Checks for overlapped settings.
Tile timer setting without the [51 mark
has priority over the ()tiler settings.
Chock Ovorlap
Tt_e fOlDwin 9 _imer sett rigs ovellap, Timer seNngs wth
an overlap ir'dr¢_o_ ne_t to Ihem wil not be entirely me0,_ed.
To change the priority of a program,
press 'l--/'II_ to select "Change." For
details, see "Changing the priority of
overlapped settings" on page 45.
Select "Close" Io return to tile Timer List.
To change or cancel the setting, repeat
steps 2 and 3 above.
To scroll the list displayby page (Page
mode)
Press _=,*REPLAY/ADVANCE ®,'_ while
the list display is turned on. Each time you
press _"® REPLAY/ADVANCE "=_'. the
entire Timer List changes to the next/
previous page of timer settings.
To turn offthe Timer List
Press TIMER LIST or o"-"e RETURN.
"_° Hint
While recerding, you cannot modil3 the timer
setting for the current rccerding, but yeu can extend
the duratien of the recording time lpage 41 ).
Notes
• Even if the timer is set, timer recordings cannot bc
made while rccerding a program that has priority.
• Even if the timer is set lbr the same daily or
weekly program, the timer recerding cannot be
made if it overlaps with a program that has
priority." 151" will appear next to the overlapped
setting in the Timer List. Check the priority order
of the settings.
If tile timer settings overlap, the program that
was set last has priority and will be recorded.
A timer recording of lower priority may be
canceled, start from the middle or stop
midway through tile program.
You can change the priority of a program if
necessary.
Whenthe timersettings overlap
The program set last has priority.
Example: You set the limer in order of A, B,
and C (setting C has lirsl priority)
7:00
[ A I will be cut off
9:001 11:00
l
t0:30_-C'-- ]
Actual recording,
,
I A I B Icl
7:00 9:00 10:30
If yon give setting B priority over setting C,
all of program B will be recorded and
program C is recorded only after program B
has ended.
I A I B ici
7:00 9:00 11:00
If the end time of one recording and the
start time of another are the same
It" progrmn B has priority, the end of program
A will be cut off.
7:00 9:00 10:00
I A
g
g.
-*_continued
45