Step6: Easysetup - Sony RDR-GX330 Operating Instructions Manual

Step6: EasySetup
Make the basic adjustments by following the
on-screen instructions in "Easy Setup."
< -,,,,,, I/4)
<><>> {
<><>{:
©, {><>
) @ >
) ? :
? ?
0% RETURN --
- *-/It/C/-*,
ENTER
3
TV I/(b
1
Turnontherecorder a ndyourTV.
Thenswitch theinput selector o nyour
TVsothatthesignal f rom the recorder
appears on yourTVscreen.
The initial settings message appears.
• If this message does not appear, select
"Easy Setup" l?om "SETUP" in the
System Menu ("Settings and
Adjustments" on page 71 ).
2 PressENTER.
Follow the on=screen insmrctions to
make the li.)llowing settings.
_Easy Setup - OSD
Select a language l\)r the on-screen
displays.
• Easy Setup - Clock
Select "Manual" and set tire clock using
"_/t_/!],/"l_', then press ENTER. The
day of the week is set automatically.
If you used antenna hookup C (page 15),
you car* select "Auto." The recorder will
atrtomatically search lk)r a channel that
carries a time signal when you turn off
the recorder after finishing Easy Setup.
'_ EasySetup - TunerPreset
Select whether or not you have a cable
connection.
The Tuner Preset fnnction automatically
searches R_rall of the receivable channels
and presets them.
To set the channels manually, see
page 71.
• EasySetup - IV Type(page74)
If you ha,_e a wide-screen TV, select
"16:9." If you have a standard TV, select
either "4:3 Letter Box" (shrink to fit) or
"4:3 Pan Scan' (stretch to riO. This will
determine how "wide-screen" images are
displayed on your TV.
'_ EasySetup- AudioConnection
If you connected an AV amplifier
(receiver) using a coaxial cord, select
"Yes : DIGITAL OUT" and set the
digital output signal (page 76).
Press ENTERwhen "Finish" appears.
"Easy Setup' is finished.
To return to thepreviousstep
Press d""e RETURN.
"_i° Hint
If you want to run "Easy Setup" again, select "Easy
Setup" from "SETUP" in the System Menu
(page 82).
Notes
• If you use an S-video cord to connect your cable
box or satellite receiver, set Linel Input" of the
"Line Input" to "S Video" in the Video" setup
(page 75).
• If there are only a few channels in your are, that
carry time signals, setting the clock automatically
may take up to about 20 minutes after the recorder
turns off. If nothing happens even d)er you wait
about 20 minutes, set the clock manually in
"Clock" of "Basic" (page 72).
.=
=_
-g
==
l=l.
23