Kenwood TM-701A Instruction Manual page 29

@ 3. The transceiver will remain
keyed for approximately 2
seconds after you press
each number, so you can
release the PTT switch
without unkeying the tran-
sceiver.
Note:
Some repeaters will require
the use of a special key se-
quence to activate the Au-
topatch function. You should
check with your control oper-
ator for this sequence.
1209
i ed
1336
'O @ MN
1477
=m © @ Ww
(Hz)
1633
'9 9 @ >:
@..7. Tone Alert System
8 private pager system ! .
1. Adjust the SQL control to the threshold point.
The T.ALT indicator will
bagin to flash.
The busy indicator will turn
on,
The audio alarm will sound.
When using the CTCSS function the incoming signal must
be present for approximately 2 seconds in order for the
T.ALT to function property.