Kenwood TM-701A Instruction Manual page 21

Yd] 3. Press the F key momentar-
ily. The F indicator will turn
on in the display, and a
memory channel number
will appear.
(Channel 8 for example)
. Select the desired memory
channel number by rotat-
ing the tuning control or by
pressing the UP/DWN
switches on the micro-
phone. (Channel 5 for
example)
. Prass the MR key within 10
seconds of selecting the
memory channel number.
A long beep will sound and
the F indicator and memory
channel number will turn
off. This signals that the
data has been properly
stored in memory.
@. Qdd Spit Memory Channels
. Press the VFO key to select
the VFO mode.
. Select the desired receiver
frequency, tone informa-
tion etc. (For example
148.600 MHz)
. Press the F kay momentar-
lly. The F indicator and a
memory channel number
will appear in the display.
(Channel & for example)
. Select any memory chan-
~ nel from 17 thru 20 using
the tuning controls.
. Press the MR key within 10
seconde of selecting the
memory channel number.
A beep will sound and the
F and Memory channel In-
dicators will turn off in the
display.
'
\ Be) 8 9 8 oe
21