Deleting The Hard Disk Drive Master And User Passwords In The System Setup - Toshiba Portege M400 Series User Manual

Toshiba portege m400: users guide
Hide thumbs Also See for Portege M400 Series:
Table of Contents

Advertisement

Using passwords in the Windows® operating system
6
If you want to change your password, input the new
password.
7
When System Setup prompts you to verify the password,
type it again and press
If the two passwords match, System Setup displays:
Registered
password if a master password is registered.
8
Press
9
When System Setup prompts you to confirm your
change, Press
Deleting the hard disk drive master and user passwords in
the System Setup
To delete the master and user passwords in System Setup:
1
Click Start, then click Shutdown, and click OK.
The computer shuts down.
2
Hold down the
switch until the on/off light on the system indicator panel
illuminates (green) for approximately one second. When
the following message appears on the screen: "Check
system, Then press [F1] key," press
The System Setup screen appears.
. Note that you can only change (not delete) the user
to save the change.
End
.
Y
HINT: You must delete the hard disk drive master password
before you can delete the hard disk drive user password.
Esc
Keeping Your Files Safe
.
Enter
key and press and hold the power
215
.
F1

Advertisement

Table of Contents
loading

Table of Contents