Deleting The Hard Disk Drive Master And User Passwords In The System Setup - Toshiba R100 User Manual

R100 user's guide
Hide thumbs Also See for R100:
Table of Contents

Advertisement

7
When System Setup prompts you to verify the password,
type it again and press
If the two passwords match, System Setup displays:
Registered
user password if a master password is registered.
8
Press
9
When System Setup prompts you to confirm your
change, Press
Deleting the hard disk drive master and user passwords in
the System Setup
To delete the master and user passwords in System Setup:
1
Click Start, then click Shutdown, and click OK.
The computer shuts down.
2
Hold down the
button until the on/off light on the system indicator panel
illuminates (green) for approximately one second. When
the following message appears on the screen: "Check
system, Then press [F1] key," press
The System Setup screen appears.
3
Press
screen.
4
Select the Master Password using the down arrow key.
5
Press the spacebar, the enter the master password and
press
6
If you want to delete the master password, leave the
space blank and press
. Note that you can only change (not delete) the
to save the change.
End
.
Y
HINT: You must delete the hard disk drive master password
before you can delete the hard disk drive user password.
Esc
to move to the HDD PASSWORD section on the
H
.
Enter
Toshiba Utilities
Hard disk drive passwords
.
Enter
key and press and hold the power
twice.
Enter
171
.
F1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ppr10c-04m8z

Table of Contents