Adjusting The Quality Of The External Display - Toshiba Portege M400 Series User Manual

This hot key cycles through the settings in the following
order:
❖
❖
❖
❖
3 Release the

Adjusting the quality of the external display

To obtain the best picture quality from your television (or
other external display device), you may need to adjust the
video settings. See the documentation supplied with the
device for additional configuration steps.
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
Presentation button
key.
Fn
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
Set the option for the video controller by clicking Start, then
Control Panel, Appearance and Themes, and then Display.
Choose the Settings tab, click the Advanced button, select
Display Device, select the applicable Monitor type, and click
Apply or OK.
TECHNICAL NOTE: To use one of the simultaneous modes,
you must set the resolution of the internal display panel to
match the resolution of the external display device. The
external display device must support a resolution of 800 X 600
or higher.
Getting Started
Using external display devices
59