Setting A Hard Disk Drive Master And User Password In System Setup - Toshiba M4 User Manual

Using passwords in the Windows® operating system
6 When System Setup prompts you to verify the password,
type it again and press
If the two passwords match, System Setup displays:
Registered
message appears. Repeat steps 5 and 6 to enter the password
again.
7 If you want to delete the user password, leave the
password field blank and press
displays:
8 Press
9 When System Setup prompts you to confirm your
change, Press
Setting a hard disk drive master and user password in
System Setup
. If the two passwords do not match, an error
Not Registered
to save the change.
End
.
Y
Make sure you choose a hard disk drive master password you
can remember easily. If you set a hard disk drive user
password and later forget the password or lose your password
diskette, you will need to enter the hard disk drive master
password in order to access your hard disk.
HINT: The hard disk drive shipped with your computer may not
support the master password feature. When you attempt to set
master password protection, your computer may alert you that
this feature is not supported by your drive. If this happens and
you want to establish a master password for your hard disk,
contact your network administrator for instructions.To register
master and user passwords in System Setup, use the following
steps.
Keeping Your Files Safe
.
Enter
Enter
.
213
twice. System Setup