Printer Problems - Toshiba Portege M400 Series User Manual

4 Remove the device when prompted to do so.
5 Click OK three times to close the Safely Remove
Hardware screen.
The system does not recognize your PC Card.
Refer to the PC Card documentation.
Removing a malfunctioning card and reinstalling it can
correct many problems.
A PC Card error occurs.
Reinsert the card to make sure it is properly connected.
If the card is attached to an external device, check that the
connection is secure.
Refer to the card's documentation, which should contain a
troubleshooting section.

Printer problems

This section lists some of the most common printer problems:
The printer will not print.
Check that the printer is connected to a working power outlet,
turned on and ready (on line).
Check that the printer has plenty of paper. Some printers will
not start printing when there are just two or three sheets of
paper left in the tray.
Never swap modules when the computer is in Hibernation or
Standby mode. This is known as "warm swapping" and is not
supported with this computer. For more information on
Hibernation and Standby modes see
Hibernation mode" on page 69
Standby mode" on page
If Something Goes Wrong
Resolving a hardware conflict
and
71.
"Using and configuring
"Using and configuring
241