Toshiba Portege M400 Series User Manual page 239

Toshiba portege m400: users guide
Hide thumbs Also See for Portege M400 Series:
Table of Contents

Advertisement

Other cards must be set up before you can use them. Use the
®
Windows
Refer to your Microsoft
information, or refer to the documentation that came with the
PC Card.
Some card manufacturers use special software called
enablers to support their cards. Enablers result in
nonstandard configurations that can cause problems when
installing the PC Card.
If your system does not have built-in drivers for your PC Card
and the card did not come with an operating system driver, it
may not work under the operating system. Contact the
manufacturer of the PC Card for information about using the
card under the operating system.
PC Card checklist
Make sure the card is inserted properly into the slot.
Make sure all cables are securely connected.
Occasionally a defective PC Card slips through quality
control. If another PCMCIA-equipped computer is
available, try the card in that machine. If the card
malfunctions again, it may be defective.
Resolving PC Card problems
Here are some common problems and their solutions:
The slot appears to be dead. PC Cards that used to work
no longer work.
Check the PC Card status:
1
Click Start.
Resolving a hardware conflict
XP PC Card (PCMCIA) Wizard to set up the card.
®
If Something Goes Wrong
documentation for more
239

Advertisement

Table of Contents
loading

Table of Contents