Removing A Module From The Ultra Slimbay - Toshiba Portege M400 Series User Manual

152
Exploring Your Computer's Features
Using the Ultra SlimBay

Removing a module from the Ultra SlimBay

NOTE
1 Do one of the following:
❖
❖
HINT: Items from this list that did not come with your computer
can be purchased separately. See the accessories information
packaged with your system or visit accessories.toshiba.com.
Use caution when lifting or turning your computer. Failure to
do so may result in damage to components, such as cables,
attached to your computer, or to the computer itself.
Turn off the computer.
Leave the computer on and hot swap the module. First,
stop the module by clicking the Safely Remove
Hardware icon on the System tray, then selecting the
module to be removed. If the system is unable to prepare
the module for safe removal, a message will tell you to try
again later. If the module can be removed now, the system
displays Safe to Remove Hardware. After the module is
stopped, it is safe to remove it.
Before you turn the computer over, make sure that the
computer display is properly closed and is not in tablet mode.
Setting the computer down on the display may cause damage
to the screen.