Install The Ex4600; What's In The Box - Juniper EX4600 Quick Start Manual

• Five fan modules
• Management interface ports: RJ-45 console (CON) port, RJ-45 management Ethernet port (CO), SFP
management Ethernet port (C1), and a USB port
• Two expansion slots for optional expansion modules
The EX4600 is available in AC-powered or DC-powered models with air-flow in or air-flow out cooling.
You can install the switch in a two-post or four-post rack. In this guide, we show you how to install an
AC-powered EX4600 in a four-post rack. If you need instructions for installing a DC-powered EX4600,
see the EX4600 Ethernet Switch Hardware

Install the EX4600

IN THIS SECTION

What's in the Box? | 2

What Else Do I Need? | 3
Rack It | 3
Let's get going and install the EX4600 in a four-post rack.
What's in the Box?
• EX4600 switch with two power supplies and five fan modules pre-installed
• Two power cords appropriate for your geographic location
• Rack mount kit
The rack mount kit contains one pair of mounting rails, one pair of mounting blades, and 12 flat-head
Phillips mounting screws.
Guide.
2