Selecting A Display - Furuno GP-3500F-D Operator's Manual

1. BASIC OPERATION
1.5

Selecting a Display

Five full-screen displays are available: Plotter, Pilot, Navigation, Compass and
Sounder. In addition to the full-screen display, you can divide the screen into
half-screen combination displays. See Chapter 2 for Plotter, Pilot, Navigation
and Compass displays, Chapter 11 for Sounder display.
1. Press the [DISP] key.
A DISPLAY MODE screen appears. There are four pages of DISPLAY MODE
screens.
2. Press the [0] key several times to show the page desired.
You may also choose a page by using the [ENTER] knob as below.
a) Rotate the [ENTER] knob to select "0. GOTO PAGE X" at the bottom of the
screen.
b) Press the [ENTER] knob to choose page.
1-10