3.6
Erasing Tracks
There are two methods to erase tracks: by color and by line type. Be absolutely
sure you want to erase track; erased track cannot be restored.
Note 1: Files set to "YES" on the DISPLAY DATA FROM MEMORY CARD menu
cannot be erased. (See paragraph 10.2.3.)
Also, files set to "YES" on the DISPLAY DATA FROM INTERNAL
MEMORY menu cannot be erased. (See paragraph 10.4.2.)
Note 2: If own track is being automatically colored according to depth or water
temperature, and the color in use just before selecting "TRACKS BY
TEMP" or "TRACKS BY DEPTH" is chosen for erasure, all depth- (or
water temperature-) colored track from that point to the time of erasure
will also be erased. (See paragraph 3.3.1.)
CHANGE SHIP'S COLOR
window setting is "8. TMP"
CHANGE SHIP'S COLOR
window setting is "1. Red"
3.6.1
Erasing tracks by color
You may erase tracks according to color, within an area or all same color track.
Erasing all track
1. Press the [TRACK COLOR] key to show the CHANGE SHIP'S TRACK
COLOR window.
2. Press the [0] key within 10 seconds to show the DELETE SHIP'S TRACK
window.
3. Press the appropriate numeric key to choose the color to erase.
The following message appears.
4. Press the [ENTER] knob to clear all tracks of the color chosen.
RED
PPL
BLU
17.6
RED
YEL
DELETE SHIP'S TRACK
1.
2.
3.
4.
5.
PRESS APPROPRIATE NUMERIC KEY TO DELETE SHIP'S TRACK.
Delete ship's track window
DELETE ALL SHIP'S TRKS
IN XXXX (type of color).
ARE YOU SURE?
YES ... PRESS KNOB
NO ... PRESS CLEAR KEY
Own ship
YEL
Erase Red
18.2
at here.
18.0
17.8
RED
YEL
6.
7.
3. TRACKS
Own ship
YEL
RED
PPL
BLU
Tracks shown
with dashed lines
are erased.
3-15