Oven Assembly; Oven Supports - Blodgett SG3240E Installation Operation & Maintenance

Conveyor ovens
Hide thumbs Also See for SG3240E:
Table of Contents

Advertisement

Available languages

Available languages

Installation

Oven Assembly

OVEN SUPPORTS

Single and Double Stacked Units
1. Bolt the leg/caster assemblies to the oven with
3/8-16 hex head bolts, lockwashers and
washers.
On gas models attach the restraint bracket to
the left rear leg as shown in Figure 4.
NOTE: Install the locking casters on the front
of the oven. The front of the oven con-
tains the front access door.
2. Have several persons carefully lift the oven off
the pallet and set it onto the casters.
3. Engage the brakes on the front casters.
Strain Relief
Bracket
Left rear leg and strain relief bracket shown
8
Front of
Oven
Figure 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sg3240g

Table of Contents