Milnor COSHN111 Installation And Service
  1. Manuals
  2. Brands
  3. Milnor Manuals
  4. Industrial Equipment
  5. COSHN111
  6. Installation and service
Milnor COSHN111 Installation And Service

Milnor COSHN111 Installation And Service

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Published Manual Number/ECN: MPICOSHMCE/2023313A
• Publishing System: TPAS2
• Access date: 09/07/2023
• Document ECNs: NOT latest
Installation and Service
COSHM111 & 112
COSHN111 & 112
COSHP111 & 112
COSHQ111 & 112
PELLERIN MILNOR CORPORATION
POST OFFICE BOX 400, KENNER, LOUISIANA 70063-0400, U.S.A.

Advertisement

Table of Contents
loading

Related Manuals for Milnor COSHN111

Summary of Contents for Milnor COSHN111

  • Page 1 Published Manual Number/ECN: MPICOSHMCE/2023313A • Publishing System: TPAS2 • Access date: 09/07/2023 • Document ECNs: NOT latest Installation and Service COSHM111 & 112 COSHN111 & 112 COSHP111 & 112 COSHQ111 & 112 PELLERIN MILNOR CORPORATION POST OFFICE BOX 400, KENNER, LOUISIANA 70063-0400, U.S.A.

  • Page 3: Table Of Contents

    Table of Contents MPICOSHMCE/23313A Page Description Document Limited Standard Warranty BMP720097/2019036 How to Get the Necessary Repair Components BIUUUD19/20081231 Trademarks BNUUUU02/2023296A 1. Safety Information Safety—Shuttle BIUUUS27VS/20051111 Proximity Safeguarding for Automatic Shuttle Conveyors BISUUI01/20171205 Use the Red Safety Supports for Maintenance — CA_, CG_, COEL_, COLF_, COSH_ BNSUUH01/2021344, Safety Pin...

  • Page 4: Page Description

    Table of Contents, continued MPICOSHMCE/23313A Page Description Document Dimensional Drawing - COSHN111, COSHN112 BDCOSHN2AE/2023313D Dimensional Drawing - COSHP111, COSHP112 BDCOSHP2CE/2023313D Dimensional Drawing - COSHP2LP112 Double Chain (50K Cakes) BDCOSHP2LPAE/2022204D Dimensional Drawing - COSHQ111, COSHQ112 BDCOSHQ2BE/2023313D Dimensional Drawing - COSHQ111/112 Double Chain (68K...

  • Page 5: Limited Standard Warranty

    (unless the time period is specifically extended for certain parts pursuant to a specific MILNOR published extended warranty) from our factory with no operating hour limitation. This warranty is contingent upon the equipment being installed, operated and serviced as specified in the operating manual supplied with the equipment, and operated under normal conditions by competent operators.

  • Page 6: How To Get The Necessary Repair Components

    • If the component is an electrical component, give the schematic number if known. • If the component is a motor or an electrical control, give the nameplate data from the used component. To write to the Milnor factory: Pellerin Milnor Corporation Post Office Box 400...

  • Page 7: Trademarks

    BNUUUU02 / 2023296 BNUUUU02 0000158094 3/3/21, 9:47 AM Released Trademarks BNUUUU02.R01 0000158093 F.2 E.2 3/3/21, 9:47 AM Released ® These words are trademarks of Pellerin Milnor Corporation and other entities: Table 1. Trademarks AutoSpot™ GreenFlex™ MilMetrix ® PulseFlow ® ®...

  • Page 9: Safety Information

    Safety Information...

  • Page 10: Safety-Shuttle

    The owner/user must familiarize himself with the contents of all machine instruction manuals. The owner/user should direct any questions about these instructions to a Milnor® dealer or the Milnor® Service department.
  • Page 11 The Safety Guide and other machine manuals must be available at all times to the appropriate personnel. See the machine service manual for safety placard part numbers. Contact the Milnor Parts department for replacement placards or manuals. Maintenance —Ensure the machine is inspected and serviced in accordance with the norms of 1.5.
  • Page 12 WARNING 6 : Fall, Entangle, and Strike Hazards—Machine motion can cause you to fall or become entangled in or struck by nearby objects if you stand, walk, or ride on the machine. Shuttles and conveyor belts move automatically. • Keep yourself and others off of machine. PELLERIN MILNOR CORPORATION...
  • Page 13 • Use the machine only for its customary and intended purpose. • Understand the consequences of operating manually. CAUTION 13 : Goods Damage and Wasted Resources—Entering incorrect cake data causes improper processing, routing, and accounting of batches. • Understand the consequences of entering cake data. PELLERIN MILNOR CORPORATION...
  • Page 14 • Lock out and tag out power to the traveling machine at the main machine disconnect if you must work in the path of the traveling machine. — End of BIUUUS27 — PELLERIN MILNOR CORPORATION...

  • Page 15: Proximity Safeguarding For Automatic Shuttle Conveyors

    OSHA Publication 3067 “Concepts and Techniques of Machine Safeguarding” ISO 10472-1 “Safety Requirements for Industrial Laundry Machinery” Hazards To Personnel in Proximity to Shuttle Conveyors Milnor automated laundering systems use to transport goods among automatic shuttle conveyors the processing machines in the system. Depending on model, an automatic shuttle conveyor may move in any of the following ways, in addition to running its conveyor belt(s): •...
  • Page 16 (which occasionally change) and with the plant layout. For this reason, Milnor does not provide detailed designs or materials for proximity safeguarding. If the necessary expertise does not exist within the owner/user's organization, consult appropriate sources such as local engineers or architects specializing in industrial facility design.
  • Page 17 Traversing and elevating shuttle conveyor for loose goods Bank of dryers Fence enclosing paths of both shuttles and both centrifugal extractors Gates interlocked with both shuttles and both centrifugal extractors. Fence segment between tunnels. Fence segments between dryers. PELLERIN MILNOR CORPORATION...
  • Page 18 3. Shuttle(s), press(es), and/or centrifugal extractor(s) cannot be restarted merely by closing the gate(s), but must be restarted at the machine control panel once the gate(s) are closed. Milnor shuttles, presses and centrifugal extractors provide such functionality when properly interfaced with gate interlock switches.

  • Page 19: Use The Red Safety Supports For Maintenance - Ca_, Cg

    Where a pair of safety supports is provided, always use both supports. � Maintain the safety support(s) in good condition. � When not in use, stow the safety support(s) in the location(s) provided on the machine � or in a convenient, designated location. Pellerin Milnor Corporation...
  • Page 20 2. The illustrations below show the safety pins deployed (at left) and stowed (at right). Install the safety pins into the receptacle holes in the frame. ________ 3. Remove electric power from the machine. End of document: BNSUUH01 Pellerin Milnor Corporation...

  • Page 21: Safety Pin

    Find the assembly for your machine and the letter shown in the "Item" column. The components for your machine will show this letter or the word "all" in the "Used In" column. The numbers shown in the "Item" column are those shown in the illustrations. Description/Nomenclature Used In Item Part Number Comments Components 04 21496 SAFETY PIN-COSHA Pellerin Milnor Corporation...
  • Page 22 Several installation guidelines and precautions are displayed symbolically, on tags placed at the appropriate locations on the machine. Some are tie-on and others are adhesive tags. Tie-on tags and white, adhesive tags may be removed after installation. Yellow adhesive tags must remain on the machine. PELLERIN MILNOR CORPORATION...
  • Page 23 The safety, installation, and electrical schematic manuals are particularly important to installers. B2TAG88005: This carefully built product was tested and ® inspected to meet Milnor performance and quality standards by B2TAG94078: Do not forklift here; do not jack here; do not step here—whichever applies.
  • Page 24 Do not discard these. B2T2007003: Install the shuttle rail in accordance with this instruction and the installation manual. B2T2010001: Mount festoon tow bar this way. (Used only on COSHM, COSHP, COSHQ & COSHR models.) — End of BIUUUI02 — PELLERIN MILNOR CORPORATION...
  • Page 26 BMP070024/2007215B (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 28 BMP070025/2007215B (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...

  • Page 29: Safety Pin

    Find the assembly for your machine and the letter shown in the "Item" column. The components for your machine will show this letter or the word "all" in the "Used In" column. The numbers shown in the "Item" column are those shown in the illustrations. Description/Nomenclature Used In Item Part Number Comments Components 04 21496 SAFETY PIN-COSHA Pellerin Milnor Corporation...

  • Page 31: Installation

    Installation...
  • Page 32 ATTENTION INSTALLERS! FLOOR IS UNEVEN Establish System Zero Line or Z. Find highest point in factory floor where footpads will be located. System Zero Line or Z is 1” above highest point. DRYER FEET MUST TO NEXT MOVE TO FOOTPAD FOOTPAD LOCATIONS BE GROUTED MARK...

  • Page 44: Installation Of The Laser Positioner For Traversing Shuttles

    In the USA, this is the OSHA lockout/tagout (LOTO) procedure. More local requirements can also apply. Milnor traversing shuttles manufactured after December 2010 are provided with a laser system to control shuttle travel along the rail (traverse) and the positions at which the shuttle stops. An older shuttle can be retrofitted with this system if it meets the following criteria: •...
  • Page 45 Installation of the Laser Positioner for Traversing Shuttles Figure 1: Laser to Post Figure 2: Reflector to Shuttle (Tube or J-rail frame) PELLERIN MILNOR CORPORATION...
  • Page 46 Do not connect the cable to the laser until the wiring in the electric cabinet is completed. 1. Determine the best route for the cable. Ensure that: • objects cannot strike the cable, • there is sufficient slack on each end to reach the connection points. PELLERIN MILNOR CORPORATION...
  • Page 47 Processor Box for Cable Only four of the conductors (the green, white, red, and blue wires) and the cable shield are used for this application. If the cable must be field-wired, make electrical connections as shown in Figure PELLERIN MILNOR CORPORATION...
  • Page 48 Perform the procedures in this section with shuttle power on, but with the machine off line. Use extreme care when you work in or near the shuttle path. Laser Configuration —Required configuration settings: 3.1. Serial interface: RS422 PELLERIN MILNOR CORPORATION...
  • Page 49 EXT.BUS. Select RS422. Locks in the selected value. Indicates that the laser is configured for an RS422 interface. SERIAL <RS422> Advances to the RS422 sub-menu. Because the RS422 selection has it's own sub-menu, this display appears. This RS422 PELLERIN MILNOR CORPORATION...
  • Page 50 Figure 5. When alignment is achieved, anchor the laser post to the floor. 6. When the laser post is securely anchored, check the alignment again and make final adjustments. 7. Tighten the laser and target bracketry. PELLERIN MILNOR CORPORATION...
  • Page 51 Determine these values at the laser device. Enter this data at the Drynet or MultiTrac console, in the Configure Shuttle Encoder form (Figure Figure 7: Configure Shuttle Encoder Form Configured for a Laser Device PELLERIN MILNOR CORPORATION...
  • Page 52 1. Testing When you have entered all shuttle stop positions in the Drynet controller, test each position as explained in document BIVSRC01 "How to Test Traversing Shuttle Stop Positions." — End of BIVSVI01 — PELLERIN MILNOR CORPORATION...

  • Page 53: How To Test Traversing Shuttle Stop Positions

    • any device that receives goods from the shuttle, such as a: » dryer (cake or loose goods conveyor) » no-dry station » storage belt. For safety and to maintain the necessary control of the devices involved in the test, set the devices Table PELLERIN MILNOR CORPORATION...
  • Page 54 3. Place a rag or similar object large enough to block the photo eye in the center of the top bed of the shuttle. 4. Start the machine ( ). The shuttle bed will run until the photo eye is blocked. The Cake Data prompt will appear on the Drynet display or the 2 x 20 display. PELLERIN MILNOR CORPORATION...
  • Page 55 9. Set both the loading device and the traversing shuttle to automatic mode ( ). The traversing shuttle will return to the home position. 10. De-energize the loading device ( 11. Repeat as necessary. — End of BIVSRC01 — PELLERIN MILNOR CORPORATION...

  • Page 57: Service And Maintenance

    Service and Maintenance...

  • Page 58: Torque Requirements For Fasteners

    These tables give the standard dimension, grade, threadlocker, and torque requirements for ® fasteners frequently used on Milnor equipment. ® Note 1: Data from the Pellerin Milnor Corporation “Bolt Torque Specification” (bolt_torque_milnor.xls/2002096). Fasteners Made of Carbon Steel 1.1. Without a Threadlocker 1.1.1.
  • Page 59 Table 3: Torque Values for Plated Fasteners with Maximum 5/16-inch Diameters and No Lubricant The Grade of the Bolt Grade 2 Grade 5 Grade 8 Grade BC Dimension Pound-Inches Pound-Inches Pound-Inches Pound-Inches 1/4 x 20 1/4 x 28 5/16 x 18 5/16 x 24 PELLERIN MILNOR CORPORATION...
  • Page 60 Specific applications sometime require that a LocTite product is applied to a bolt size outside the ranges shown here. For example, Milnor specifies LocTite 242 for use on certain 1" bolt applications and has confirmed this usage with the LocTite manufacturer. You may see variances such as this in the documentation for specific machine assemblies.
  • Page 61 Table 8: Torque Values if You Apply LocTite 262 The Grade of the Bolt Grade 2 Grade 5 Grade 8 Grade BC Dimension Pound-feet Pound-feet Pound-feet Pound-feet 3/4 x 10 3/4 x 16 7/8 x 9 7/8 x 14 PELLERIN MILNOR CORPORATION...
  • Page 62 1.2. Table 11: Torque Values for Stainless Steel Fasteners 5/16-inch and Smaller 18-8 Stainless with 316 Stainless 18-8 Stainless Loctite 767 Pound-Inc Pound-Inc Pound-Inc Dimension 1/4 x 20 1/4 x 28 5/16 x 18 5/16 x 24 PELLERIN MILNOR CORPORATION...
  • Page 63 CAUTION 3 : Malfunction Hazard—Heat, vibration, or mechanical shocks can let the fasteners loosen if you do not apply the threadlocker correctly. Loose fasteners can cause malfunctions of the equipment. • Read the threadlocker manufacturer's instructions and warnings. Obey these instructions. PELLERIN MILNOR CORPORATION...
  • Page 64 No threadlocker here Apply the threadlocker to this area Nut depth Disassembly —For high-strength threadlocker, apply heat for five minutes. Disassemble with 3.3. hand tools while the parts are hot. For low-strength and moderate-strength threadlocker, disassemble with hand tools. PELLERIN MILNOR CORPORATION...
  • Page 65 Torque Requirements for Fasteners Figure 4: Disassembly Apply Heat to a Small Area Legend How to apply heat to a small fastener How to apply heat to a large fastener — End of BIUUUM04 — PELLERIN MILNOR CORPORATION...
  • Page 66 BMP180019/2020302A Page (1 / 2) Top Beam Assembly COLFM111/112, COLFP111/112, COLFQ111/112, COLFR111/112 COSHM111/112, COSHP111/112, COSHQ111/112, COSHR111/112 7,8 (4 places) 11,12 (2 places) PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 67 HEXCAPSCR 3/4-10UNC2AX5" GR8 15G246NT HEXTHINNUT 3/4-10 STL/ZNC W/NY 15K151 HXCAPSCR 1/2-13UNC2AX1.25 GR5 17N080 1/2-13 GRIPNUT ZINC #C7968-121 15K198 HEXCAPSCR 1/2-13UNC2AX3 GR5 ZI 15U280 FL+WASHER(USS STD)1/2 ZNC PL+D 15U300 LOKWASHER REGULAR 1/2 ZINC PLT 15G234N HXLOCKNUT NYL 1/2-13UNC2 STL/Z PELLERIN MILNOR CORPORATION...

  • Page 68: Hook Mounted Chain Hoist

    Comments -------------------------------------------------------------------------------------------COMPONENTS-------------------------------------------------------------------------- 27KH050A83 DEMAGHOIST 2TON 24FPM 380V60 27KH050A89 DEMAGHOIST 1TON48FPM 460V60 27KH050A88 DEMAGHOIST 1 TON 24FT/MIN 460V 27KH050A92 DEMAGHOIST 1TON39FPM 380-415V/3/50 27KH050A81 DEMAGHOIST 2TON 24FPM 460V 27KH04816 HOIST 1TON 48FPM 230V60 COFF#EC2048-2-20 27KNER010A HOIST 1TON 28FPM 230/460V PELLERIN MILNOR CORPORATION...

  • Page 69: Bed Lifting Frame & Cross Member

    BMP180024/2018266A Page (1 / 5) Bed Lifting Frame & Cross Member COLFM111, COLFM112, COSHM111, COSHM112 Figure 1: Bed Lifting Frame for One Bed Figure 2: Bed Sliding Pads 32,33,34 View A-A (4 places) PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 70 BMP180024/2018266A Page (2 / 5) Bed Lifting Frame & Cross Member COLFM111, COLFM112, COSHM111, COSHM112 Figure : 3 Bed Lifting Frame for Two Beds 27,28 27,28 PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 71 COLFM111, COLFM112, COSHM111, COSHM112 Figure : Bottom View of Cross Member, Side Slides, Wheels and Stops 27,28 stop 27,28 stop 27,28 stop 27,28 stop Figure 5: Lifting Cross Member (4 places) 12,13 14,15,16 17,18 17,18 9,10,11 PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 72 LIFTING X-MEMBER SHIM 04 23376 BED LIFTING CHAN SPACER 04 23373A SLACKCHAIN SW BRKT-COSHM 02 18187 SPRING=OUTER DOOR 60 WEHU X4 24647 CLEVIS PIN 3/4"X1.75LG 304SS 15H060 STDCOTTERPIN 3/16X2 ZINCPL X4 24648 CLEVIS PIN 1/2"X1.50LG 304 SS PELLERIN MILNOR CORPORATION...
  • Page 73 15U200 FLATWASHER(USS STD) 5/16"ZNC P 27B2100G0L SPCRROLL.39ID.562L.048T STLZNC 27B25002SZ SPCRROLL.39ID.125L.048T STLZNC 04 23304 TOP BED MTG 15DEG-LF 04 23304B TOP BED MTG 15DEG-RT 15K065 HEXCAPSCR 5/16-18UNC2AX1 GR5 Z 15G196 HXFLGNUT 5/16-18 ZINC 09R012STDG * 09R012 +MOUNTING HDWRE+INST PELLERIN MILNOR CORPORATION...

  • Page 74: Bed Stop Targets And Switches

    Page (1 / 2) Bed Stop Targets and Switches COLFM111 /112, COLFP 111/112, COLFQ111/112 COSHM111/112, COSHP111/112, COSHQ111/112 11,12,13 Load Proximty Switch Discharge Load Proximty Target Switch Discharge Target 14,15 7,8,9,10 View A-A: (Bottom View) PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 75 LOCKWASHER MEDIUM 1/4 ZINCPL 15U185 FLATWASHER(USS STD) 1/4" ZNC P 17N058 HEXRIVNUT 1/4-20 UNC-2B #2520- 17M010 #8-32X3/8" FPHMSUC ZINC 15U210 LOKWASHER MEDIUM 5/16 ZINCPL 15G100 HXMACHSCRNUT 8-32UNC2B ZINC GR 15K038C 1/4-20X 3/4 HEXFLANGE SCRW SS 15G178 1/4"-20 HEXFLANGE NUT ZINC PELLERIN MILNOR CORPORATION...

  • Page 76: Single Bed Or Upper Bed 44 X 62

    To order gear reducers, supply the parts department with your gear reducer’s serial number and gear ratio. See the gear reducer’s nameplate. Upper Bed 6,23 (drive for 7,23 (drive for lower bed) lower bed) PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 77 Page (2 / 3) Single Bed or Upper Bed 44 x 62 COLFM111, COLFM112, COSHM111, COSHM112 Figure 2: Typical Hardware 29,20,31 36,37,38 25,26,27 25,26,27 25,26,27 29,20,31 29,20,31 29,20,31 32,33,34 29,30,35 32,34 26,27,28 26,27,28 25,26,27 PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 78 HXNUT 3/8-16UNC2B ZINC GR2 15K091H HEXFLGSCR 3/8-16X3/4 ZN GRD.5 15U245A FLTWASH 25/64IDX1.25ODX3/32 S/ 15U241MB FLAT WASHER-1.50D 1+1/32ID 10G 15U343 FLATWASH 1X25/64X1/8 ZINC 15K203 HXTAPSCR TFL 1/2-13X5 GR5 ZINC 15G230 HXNUT 1/2-13UNC2B SAE ZINC GR2 15G222B HEXFLGNUT 1/2-13 ZINC SERRATED PELLERIN MILNOR CORPORATION...

  • Page 79: Lower Bed 48 X 62

    21,22 (4 places) 15 To order gear reducers, supply the parts department with your gear reducer’s serial number and gear ratio. See the gear reducer’s nameplate. 20,21 20,21 Belt 17 18,19 (not shown) 18,19 PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 80 BMP180026/2018266A Page (2 / 3) Lower Bed 48 x 62 COLFM112, COSHM112 Figure 2: Typical Hardware 36,37,38 29,20,31 25,26,27 29,20,31 25,26,27 29,20,31 29,20,31 19,32,33 29,30,35 19,32 26,27,28 26,27,28 25,26,27 PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 81 HXNUT 3/8-16UNC2B ZINC GR2 15K091H HEXFLGSCR 3/8-16X3/4 ZN GRD.5 15U245A FLTWASH 25/64IDX1.25ODX3/32 S/ 15U241MB FLAT WASHER-1.50D 1+1/32ID 10G 15U343 FLATWASH 1X25/64X1/8 ZINC 15K203 HXTAPSCR TFL 1/2-13X5 GR5 ZINC 15G230 HXNUT 1/2-13UNC2B SAE ZINC GR2 15G222B HEXFLGNUT 1/2-13 ZINC SERRATED PELLERIN MILNOR CORPORATION...

  • Page 82: Low Headroom Double Chain Hoist - Option

    BMP140055/2018343A Page (1 / 7) Low Headroom Double Chain Hoist - Option COSHM111/112, COSHP111/112, COSHQ111/112 Figure 1: Low Headroom Double Chain Hoist Shuttle COSHQ112 Shown PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 83 BMP140055/2018343A Page (2 / 7) Low Headroom Double Chain Hoist - Option COSHM111/112, COSHP111/112, COSHQ111/112 Figure 2: Double Chain Hoist - Load Side PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 84 Page (3 / 7) Low Headroom Double Chain Hoist - Option COSHM111/112, COSHP111/112, COSHQ111/112 Figure 3: Hoist Drive Components KEYS Lifting Shaft KEYS Lifting Bar Detail A 5,6,7 5,6,7 Detail A: Shaft Chain Connection (2 places) PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 85 BMP140055/2018343A Page (4 / 7) Low Headroom Double Chain Hoist - Option COSHM111/112, COSHP111/112, COSHQ111/112 Figure 4: Double Chain Hoist Views 2 Places Jackshaft Drive Housing PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 86 Low Headroom Double Chain Hoist - Option COSHM111/112, COSHP111/112, COSHQ111/112 Figure 5: Switch Settings 18" Overload Overload Protection Safety Setting Switch 1-1/2" 2" Mounting Bracket Loose Chain 4-1/4" 46,47,48 Safety View C-C Switch View B-B: Switch Mounting PELLERIN MILNOR CORPORATION...
  • Page 87 04 22184 KICKPLATE SW MTG BRKT 02 19288 BRACKET=ADJUSTING-1.5X1.75 15K203 HXTAPSCR TFL 1/2-13X5 GR5 ZINC 09RPS40AAS PROXSW 40M NO/NC-AC-RECT 04 24374 UPPER LIMIT PROX. BRKT 04 24375 UPPER LIMIT TARGET 04 24376 TOW BAR MTG BRKT-DBL CHAIN PELLERIN MILNOR CORPORATION...
  • Page 88 SHAFTCOLLAR 1.4375 CFG #23S 04 22338 TORQUE LIMIT SW TARGET 54N050B16 SPRKT 50BTL16H-1610#100534 56Q1HTB 1+7/16"TAPRLOCKBUSH1610#119226 54N080B13 SPRKT 80BTL13H-1615 #100596 54N080B18 SPRKT 80BTL18H-2012 #100601 56Q1HTB1 1+7/16"TAPRLOCKBUSH1615#119055 56Q1HTB2 1+7/16"TAPRLOCKBUSH2012#119256 54N050B15B SPRKT, IDLER 51E15 #102054 27B32024SS SPACER ROLL .5IDX1.5LX.062T SS PELLERIN MILNOR CORPORATION...

  • Page 89: Cart With Floor Drive

    33,34 27,37 N1,28,29,30 17 (Use the lockwashers 20,21 supplied with the wheel. 19,19 19,19 Replace the supplied View A-A bolts with item 17.) Drive Roller, Motor, Gear Reducer PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 90 24,26,27 Track Guide Assembly 12,13 Lubrication fitting 5 Inch Roller Drive Side 38,39 5 Inch Roller Non-Drive Side View B-B 5 Inch Roller Drive Side Figure 3: Typical Hardware 33,34 29,31,35,36 24,27 27,37 27,37 PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 91 1/2-13 X 1 FLGBOLT NON-SERR ZN 15U280 FL+WASHER(USS STD)1/2 ZNC PL+D 15U300 LOKWASHER REGULAR 1/2 ZINC PLT 15G230 HXNUT 1/2-13UNC2B SAE ZINC GR2 17A061 EYE END 3/8-16X1.5 ZINC 15G245 HXFINJAMNUT 3/4-10UNC2 SS18-8 06 20070 LOCKING WASHER ROLLER SHAFT PELLERIN MILNOR CORPORATION...

  • Page 92: Kickplate Assembly

    Kickplate Assembly BMP180029/2018266A COSHM111/112, COSHP111/112, COSHQ111/112 (1 / 3) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 (2 places) 17,18...
  • Page 93 Kickplate Assembly BMP180029/2018266A COSHM111/112, COSHP111/112, COSHQ111/112 (2 / 3) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 (uses 2) Rounded side of washer to the inside View A-A: Kickplate spring Kickplate mounting hanger...
  • Page 94 Kickplate Assembly BMP180029/2018266A COSHM111/112, COSHP111/112, COSHQ111/112 (3 / 3) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Kickplate Assembly Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...

  • Page 95: Festoon Pulling Bar

    Festoon Rail Components, BMP180032. Tow Bar Tow Trolley Festoon Car 15,16 13,14 11,12 Festoon Pulling Strap the festoon to the frame PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 96 FLATWASHER 1"ODX25/64IDX1/8"30 04 22410 FESTOON PULL CHANNEL 04 20750 PAD=FESTOON CABLE CLAMP 04 20750B CHANNEL=PAD CLAMP FESTOON 15A009 CARBOLT 5/16-18NC2X3.5 FULTHD 15G193 HEXLOKNUT 5/16-18UNC2A NYL STL X4 24297 FESTOON TOW BAR-TAP 04 24298 FESTOON TOW BAR EXTENSION PELLERIN MILNOR CORPORATION...

  • Page 97: Laser Target

    BMP180031/2018266A Page (1 / 2) Laser Target COSHM111/112, COSHP111/112, COSHQ111/112 Figure 1: Emitter, Laser Mounting Post, and Reflector Tube Emitter Reflector For Installation Instructions See BIVSVI01. PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 98 RDMACSCR 10-24UNC2AX1/2 ZC GR2 15U135 FLATWASH#10 .4370DX.203IDX.04T 15G126SZ HXLOCKNUT 10-24 UNC STL/ZNC 15P011 TRDCUT-F PANHD 10-24X1/2 NIKST 09RLE0001 LIGHT GAGE LONG RANGE TIME-OF-FLIGHT LASER SENSOR 09RLE0001C QUICK DISCONNECT CABLE 30' 09RLE0001R 50 METER RETRO REFLECTOR 09RLE0001B MOUNTING BRACKET PELLERIN MILNOR CORPORATION...
  • Page 99 BMP180032/2022293A Page (1 / 4) Rail Components All Translating Cart Shuttles Figure 1: Bottom Rail Drive Rail Idler Rail Home Oops Target Target PELLERIN MILNOR CORPORATION...
  • Page 100 14,15 14,15 Stop Stop 9,10 9,10 Figure 3: Festoon Rail Components Figure 3: Festoon Rail Components Festoon Festoon Rail Rail Connector Connector Festoon Rail Electric Box Festoon Rail Electric Box Festoon Rail Festoon Rail PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 101 Festoon Rail Support Festoon Upper Rail Upper Rail Rail Hanger 12ga Hanger 14ga (obsolete) Festoon Rail Supports Figure 5: Festoon Cars Festoon Car with Air Festoon Tow Festoon Car Festoon Tow Car, no air no air Car, with air PELLERIN MILNOR CORPORATION...
  • Page 102 27A765A 12GA PARA-TRACK JOINT CLAMP 27A765B TRACK HANGER CLAMP ASSY ALC420070B UPPER RAIL HANGER ASSY 3.8T ALC420070C UPPER RAIL CEILING SUPP-3.8T 27A768 12GA FESTOON TOW TROLLEY/2SADDLES 27A767 12GA FESTOON TROLLEY/2 SADDLES 27A756B SWIVEL ADP. FOR HOSE 1.25"DIA PELLERIN MILNOR CORPORATION...

  • Page 103: Dimensional Drawings

    Dimensional Drawings...

This manual is also suitable for:

Coshm112Coshm111Coshn112Coshp111Coshp112Coshq111 ... Show all

Table of Contents