Telephone operation
Redial
The telephone base and each handset store the last 10 dialed numbers (up
to 30 digits each) in the redial list. The redial entries of each handset and the
telephone base are independent.
Review the redial list
To review the redial list of a handset:
Press REDIAL/
1.
Press q
, p
2.
CID
The handset beeps twice at the end of the list.
Press
OFF/
CANCEL
To review the redial list of the telephone base:
1.
Press REDIAL/
Press q
2.
CALLER ID
repeatedly to browse through the list. The telephone
base beeps twice at the end of the list.
Press CANCEL to exit.
Dial a redial entry
To dial a redial entry on a handset:
1. Press
HOME/FLASH, or
REDIAL/
PAUSE
2. Press
,
q
p
CID
number displays. The handset beeps twice at the end of the list.
DIAL
3. Press
to dial the number displayed.
-OR-
1. Press
CELL 1 or
to enter the redial list.
2. Press
q
,
p
CID
number displays. The handset beeps twice at the end of the list.
INSERT
3. Press
DIAL
4. Press
to dial the number displayed.
in idle mode.
PAUSE
or REDIAL/
DIR
to exit.
in idle mode.
PAUSE
, p
DIRECTORY
/SPEA�ER to use the home line, then press
to enter the redial list.
REDIAL/
or
DIR
PAUSE
CELL 2 to use the cell line, then press REDIAL/
REDIAL/
or
DIR
PAUSE
to insert the desired number.
repeatedly to browse through the list.
PAUSE
or REDIAL/
PAUSE
repeatedly to browse until the desired
repeatedly to browse until the desired
61
PAUSE