Change Pin; Cell Ringer - AT&T CLP99283 User Manual

Bluetooth
Bluetooth setup

Change PIN

You are required to enter a PIN when establishing a Bluetooth connection.
The default PIN of your telephone base is 0000.
To change the PIN:
1. Press MENU
enter the main menu.
2. Press
CALLER ID
then press SELECT
3. Press
CALLER ID
PIN, then press
ENTER NEW PIN and the existing PIN.
4. Use the dialing keys to enter a new 4-digit code.
• Press X/DELETE to erase a digit.
• Press and hold X/DELETE to erase all digits.
• Press
CALLER ID
SET
5. Press to save.

Cell ringer

If this feature is on and you have connected an iPhone (iOS 4.1 or later) to
your telephone system, the telephone plays your iPhone ringtone when there
is incoming call.
MENU
1. Press
enter the main menu.
2. Press
CALLER ID
then press SELECT.
3. Press
CALLER ID
Cell ringer, then press SELECT.
• If there are more than one paired device on the
device list, press
highlight the desired device, then press SELECT.
4. Press
CALLER ID
NOTE: The quality of ringtone played on your telephone is subject to individual ringtone
characteristics.
on the telephone base in idle mode to
or
DIRECTORY
.
or
DIRECTORY
SELECT . The telephone base displays
or
DIRECTORY
on the telephone base in idle mode to
or
DIRECTORY
or
DIRECTORY
CALLER ID
or
DIRECTORY
to highlight Bluetooth,
to highlight Change
to move the cursor to the left or right.
to highlight Bluetooth,
to highlight
or to
DIRECTORY
to choose On or Off, then press SET.
32
BLUETOOTH
Device list
Download dir
Change PIN
BACK SELECT
ENTER NEW PIN
0000
BACK SET
BLUETOOTH
Download dir
Change PIN
Cel l ringer
BACK SELECT
CELL RINGER
On
Off
BACK SET