AT&T CLP99283 User Manual page 139

Appendix
Display screen messages
Screen messages
No messages
No PTT call
No signal.
Call ended.
Not available
at this time
Number
already saved
Out of range
OR no power
at base
** Paging **
Paging all devices
Place in charger
PTT From
HANDSET X
To devices:
X
PTT From
HANDSET X
To devices:
X
PTT To
HANDSET X
PTT To
BASE
Push to talk
Ended
Quiet mode on
Quiet mode is off
There are no messages in the answering system.
The incoming PTT function is turned off. The handset will not
receive PTT calls.
The phone lost connection with the telephone base or did not
have a strong enough signal and the phone call ended.
Someone else is already using the directory or caller ID log.
When a handset tries to access the answering system or
Bluetooth menu during battery backup mode.
The telephone number you have entered is already in the
directory.
The telephone base has lost power, or the handset is out
of range.
The cordless handset is paged by the telephone base.
The telephone base is paging all devices.
The battery is very low. The handset should be charged.
One handset has started a PTT session to another handset and
telephone base.
One handset has started a PTT session to another handset.
You have started the PTT process with a handset.
You have started the PTT process with the telephone
base.
0
The PTT session is ended.
QUIET mode is on.
QUIET mode is turned off.
133