Voice Prompts; Call Screening - AT&T CLP99283 User Manual

Answering system
About the answering system

Voice prompts

The system provides voice prompts to guide you through the setup procedures
at the telephone base, message playback, remote access and recording
outgoing announcements.

Call screening

To screen a call at the telephone base:
If the answering system and call screening are on (see Call screening on
page 106), the announcement and the incoming message broadcast at the
telephone base when a call is answered by the answering system.
Options while a message is being recorded:
Press q/VOLUME/p on the telephone base to adjust the call
•
screening volume.
• Press /PLAY/STOP or
call screening.
/PLAY/STOP or
• Press
if call screening is set to off.
HOME to answer the call.
• Press
To screen a call at the handset:
If the answering system is on and your answering system is recording a
message, press
displays the caller ID information. If you do not subscribe to caller ID service,
the handset shows Home Incoming call.
Options while a message is being recorded:
Press q /VOLUME or p
•
CID
screening volume.
• Press /CANCEL or
OFF
SCREEN
• Press
set to off.
/SPEA�ER SPEA�ER to broadcast the announcement and the incoming
• Press
message through the speakerphone. Press again to turn off the speakerphone.
SILENCE
SCREEN
SCREEN
to screen the call on your handset and the screen
DIR
SILENCE
to temporarily turn on the call screening if call screening is
to temporarily silence the
to temporarily turn on the call screening
/VOLUME on the handset to adjust the call
to temporarily silence the call screening.
114