Table of Contents
Advertisement
Adjusting the Guideline Marker Position
If the guideline marker indicates the position incorrectly in
the center needle position, adjust the initial position in the
settings screen.
a
Touch
.
The settings screen appears.
b
Touch
.
The sewing settings screen appears.
c
Display [Guideline Marker Adjustment] in the sewing
settings screen.
d
Touch
.
e
Use
or
to adjust the guideline marker position.
*
: Move the guideline marker to the left.
: Move the guideline marker to the right.
f
Touch
twice to return to the original screen.
Adjusting the Brightness of the Guideline
Marker
a
a
Follow steps from
to
Marker Adjustment] screen.
b
Use
or
to adjust the brightness of the guideline
marker.
Set the brightness of the guideline marker from [1] for
a dim marker, to [5] for the brightest marker, on the
fabric.
c
Touch
twice to return to the original screen.
d
to display the [Guideline
Pivoting
If the pivot function is selected, the machine stops with the
needle lowered (in the fabric) and the presser foot is
automatically raised to an appropriate height when the "Start/
Stop" button is pressed. When the "Start/Stop" button is
pressed again, the presser foot is automatically lowered and
sewing continues. This function is useful for stopping the
machine to rotate the fabric.
CAUTION
• When the pivot setting is selected, the
machine starts when the "Start/Stop" button is
pressed or the foot controller is pressed down
even if the presser foot has been raised. Be
sure to keep your hands and other items away
from the needle, otherwise injuries may occur.
Memo
• When the pivot setting is selected, the height of the
presser foot when sewing is stopped can be
changed according to the type of fabric being
sewn. Touch
the settings screen. Touch
height. To raise the presser foot further, increase
the setting.
a
Select a stitch.
b
Touch
to select the pivot setting.
The key appears as
Memo
• If
appears as light gray when the stitch pattern
was selected, the pivot function cannot be used.
• If the pivot function is selected,
beside [Presser Foot Height] in the settings screen
are not available and the setting cannot be
changed.
USEFUL FUNCTIONS
to display [Pivoting Height] of
or
to select the
.
and
2
65
Advertisement
Table of Contents
