Cleaning The Bobbin Case - Baby Lock Altair 2 Instruction & Reference Manual

Table of Contents

Advertisement

CARE AND MAINTENANCE
h
Use the cleaning brush or a vacuum cleaner to remove
any lint and dust from the race and bobbin thread
sensor and the surrounding area.
c
1 Cleaning brush
2 Race
3 Bobbin thread sensor
IMPORTANT
• Do not apply oil to the bobbin case.
Memo
• If lint or dust collects on the bobbin thread sensor,
the sensor may not operate correctly.
i
Insert the bobbin case so that the  mark on the
bobbin case aligns with the
a
Align the  and
*
1  mark
2
mark
3 Bobbin case
*
Make sure that the indicated points are aligned
before installing the bobbin case.
CAUTION
• Never use a bobbin case that is scratched or
has a burr on it. Otherwise the upper thread
may become tangled, and the needle may
break and cause injury. For a new bobbin case,
contact your nearest authorized Baby Lock
retailer.
• Be sure that the bobbin case is correctly
installed, otherwise the needle may break and
cause injury.
184
a
mark on the machine.
a
marks.
c
j
Insert the tabs on the needle plate into the notches in
the machine.
1 Tabs
2 Notches
k
Press down on the right side of the needle plate to
secure it.

Cleaning the Bobbin Case

Thread wax and dust easily collect around the notch in the
tension spring on the bobbin case, resulting in an incorrect
thread tension. Therefore, the bobbin case should be cleaned
as necessary should tension problems arise.
When cleaning the bobbin case, use card stock or another
type of paper of similar thickness and sturdiness in order to
prevent pieces of paper tearing off and getting lodged in the
bobbin case.
a
a
g
Follow steps
to
remove the bobbin case.
b
Using a piece of paper of adequate thickness and
sturdiness, slide the paper between the tension plate
base and the tension spring and also slide the paper
behind the notch of the spring to remove any dirt or
dust.
1 Tension plate base
2 Notch
3 Paper (e.g. business card type)
4 Tension spring
Memo
• Do not bend the tension spring. In addition, do not
use anything other than recommended paper to
clean the bobbin case.
a
in "Cleaning the Race" to

Advertisement

Table of Contents
loading

This manual is also suitable for:

Blta2

Table of Contents