Table of Contents
Advertisement
Note
• When cutting thread thicker than #30, nylon
monofilament thread, or other decorative threads,
use the thread cutter on the side of the machine.
k
When the needle has stopped moving, raise the presser
foot and remove the fabric.
Using Advanced Multi-Function Foot
Controller
With the advanced multi-function foot controller, various
sewing machine operations in addition to starting/stopping
sewing, such as thread cutting and reverse stitching, can be
specified to be performed.
WARNING
• The advanced multi-function foot controller
contains small parts. Keep the product out of
the reach of children to prevent accidental
ingestion of small parts.
Note
• (For U.S.A. only) Foot controller: Model X
This foot controller can be used on the machine
with product code 882-W74. The product code is
mentioned on the machine rating plate.
1
3
No.
Part Name
1
Main foot controller
2
Side pedal
3
Mounting plate
4
Mounting screw × 2
a
Align the smaller end of the mounting plate with the
guide on the bottom of the side pedal, and then gently
fasten them together with the mounting screw.
Align the larger end of the mounting plate with the
guide on the bottom of the main foot controller, and
then gently fasten them together with the mounting
screw.
c
1 Guide on side pedal
2 Mounting plate
3 Guide on main foot controller
Memo
• The side pedal can be mounted on either the left or
right side of the main foot controller.
• The main foot controller and side pedal can also be
used without installing the mounting plate.
SEWING
2
4
a
b
2
55
Advertisement
Table of Contents
