Adjusting The Screen; Touch Panel Is Malfunctioning; Troubleshooting; Frequent Troubleshooting Topics - Baby Lock Altair 2 Instruction & Reference Manual

Table of Contents

Advertisement

ADJUSTING THE SCREEN

ADJUSTING THE SCREEN

Touch Panel is Malfunctioning

If the screen does not respond correctly when you touch a key
(the machine does not perform the operation or performs a
different operation), follow the steps below to make the
proper adjustments.
a
Holding your finger on the screen, turn the main
power switch to OFF and back to ON.
 The touch panel adjustment screen appears.
b
Using the included touch pen, lightly touch the center
of each +, in order from 1 to 13.
Note
• Only use the included touch pen to touch the
screen. Do not use a mechanical pencil, pin, or
other sharp object. Do not press too hard on the
screen. Otherwise, damage may result.
c
Turn the main power to OFF, then turn it back to ON.
Note
• If you finish the screen adjustment and the screen
still does not respond, or if you cannot do the
adjustment, contact your authorized Baby Lock
retailer.
186

TROUBLESHOOTING

If the machine stops operating correctly, check the
following possible problems before requesting service.
You can solve most problems by yourself.
Visit us at www.babylock.com.
If the problem persists, contact your authorized Baby Lock
retailer.

Frequent Troubleshooting Topics

Detailed causes and remedies for common troubleshooting
topics are described below. Be sure to refer to this before
contacting your authorized Baby Lock retailer.
 Upper Thread is Too Tight
 Tangled Thread on Wrong Side of
Fabric
 Incorrect Thread Tension
 Fabric is Caught in the Machine
and Cannot Be Removed
 If the Thread Becomes Tangled
Under the Bobbin Winder Seat

Upper Thread is Too Tight

 Symptom
*
The upper thread appears as a single continuous
line.
*
The bobbin thread is visible from the right side of
the fabric. (Refer to the illustration below.)
*
The upper thread has tightened up, and comes out
when pulled.
*
The upper thread has tightened up, and wrinkles
appear in the fabric.
*
The upper thread tension is tight, and the results do
not change even after the thread tension is adjusted.
a
1 Wrong side of fabric
2 Bobbin thread visible from right side of fabric
3 Upper thread
4 Right side of fabric
5 Bobbin thread
page 186
page 187
page 187
page 188
page 189
c

Advertisement

Table of Contents
loading

This manual is also suitable for:

Blta2

Table of Contents