Connecting The Machine; Power Connection; Foot Controller - Baby Lock Jazz BLMJZ Instruction And Reference Manual

Power Connection

1
Place machine on a sturdy table and make sure
the main power switch is in the OFF position.
2
Connect the foot controller plug to the machine.
3
Connect the power supply plug to a wall outlet.
WARNING
Use regular household electricity for power source. Using
other power sources may result in fire, electric shock, or
damage to the machine.
Turn off the main power and remove the plug in the following
circumstance:
When you are away from the machine
After using the machine
When the power fails during use
When the machine does not operate correctly due to a bad
connection or a disconnection
During electrical storms
CAUTION
Do not use extension cords or multi-plug adapters with
many other appliances plugged in to them. Fire or electric
shock may result.
Do not touch the plug with wet hands. Electric shock may
result.
When unplugging the machine, always turn off the
main power first. Always grasp the plug to remove it from
the outlet. Pulling on the cord may damage the cord, or lead
to fire or electric shock.
Do not allow the power cord to be cut , damaged, modified,
forcefully bent, pulled, twisted, or bundled. Do not place
heavy object on the cord. Do not subject the cord to heat.
These behaviors may damage the cord and cause fire or
electric shock. If the cord or plug is damaged, take the
machine to your authorized Baby Lock retailer for repairs
before continuing use.
Unplug the power cord if the machine is not to be used for a
long period of time, otherwise a fire may result.

Foot Controller

1 Connect the foot control to the machine by inserting the 3 hole plug
into the power cord receptacle located on the right side of sewing
machine.
2
When you press the foot controller lightly, the machine will run at
a low speed.
When you press harder, the speed of machine will increase.
When you take your foot off the foot controller, the machine will stop.
You should make sure that no items are placed on the foot controller
when the machine is not in use.
CAUTION
Do not allow pieces of cloth and dust to build up on the foot controller.
Doing so could cause a fire or an electric shock.
US ONLY
This appliance has a polarized plug (one blade wider than
the other). To reduce the risk of electrical shock, this plug
is intended to fit in a polarized outlet only one way. If the plug
does not fit fully into the outlet please reverse the plug. If it
still does not fit, contact a qualified electrician to install the
proper outlet. Do not modify the plug in any way.
-8-
Main Power Switch
Use only foot controller provided with this
machine.Foot Controller: Model YC-482
:OFF
:ON