Adjusting The Screen; Adjusting The Brightness Of The Screen Display; Touch Panel Is Malfunctioning - Baby Lock Destiny BLDY Instruction And Reference Manual

ADJUSTING THE SCREEN

ADJUSTING THE SCREEN
Adjusting the Brightness of the
Screen Display
If the screen does not look very clear under certain
situations, you can adjust the brightness of the
screen display.
a
Press .
→ The settings screen appears.
b
Press
→ The General settings screen appears.
c
Display page 4 of the General settings
screen.
d
Press or
the screen display.
* The screen will dim as the number on the settings
screen decreases. The screen will appear brighter as
the numbers increase.
380
.
to adjust the brightness of

Touch Panel is Malfunctioning

If the screen does not respond correctly when you
touch a key (the machine does not perform the
operation or performs a different operation), follow
the steps below to make the proper adjustments.
a
Holding your finger on the screen, turn the
main power switch to OFF and back to ON.
→ The touch panel adjustment screen is displayed.
b
Using the included touch pen, lightly touch
the center of each +, in order from 1 to 13.
Note
• Only use the included touch pen to touch
the screen. Do not use a mechanical pencil,
pin, or other sharp object. Do not press too
hard on the screen. Otherwise, damage
may result.
+1
+5
+2
+11
+9
c
Turn the main power to OFF, then turn it
back to ON.
Note
• If you finish the screen adjustment and the
screen still does not respond, or if you
cannot do the adjustment, contact your
authorized Baby Lock retailer.
+4 7+
+8
+3 6+
+13
+10 12+