Additional Reading - Nvidia BlueField-2 User Manual

FW
[...]
Done
c. Perform a DPU reset:
dpu# sudo mst start
dpu# sudo mlxfwreset -d /dev/mst/mt41686_pciconf0 --sync 1 -y reset
3. Verify that the BFB has been installed and the firmware has been upgraded successfully by accessing the DPU again:
a. SSH to the BlueField DPU from the host:
ssh ubuntu@<oob-ip>
b. Check the versions of the DPU image and firmware:
# sudo bfvcheck
Expected output example:
Beginning version check...
-INSTALLED VERSIONS-
ATF: v2.2(release):4.0.0-46-g208eda9
UEFI: 4.0.0-262-g314fe1b
FW: <New_FW_ver>
Version check complete.
No issues found.

Additional Reading

To learn more about BlueField please see:
• BlueField hardware troubleshooting
<Old_FW_ver> <New_FW_ver>
24