Fhhl Cards Installation - Nvidia BlueField-2 User Manual


Please note that the following figures are for illustration purposes only.
FHHL Cards Installation
 To power-up the FHHL P-Series DPUs that have an x16 PCIe Gen 4 interface, you need to connect a PCIe external power cable to the on-board 6-
pin ATX connector. The PCIe external power cable should be supplied by the customer (usually included with standard servers). See External Power
Supply Connector under Pin Description chapter.
1. Open the system case.
2. Place the DPU in an available PCI Express slot.
3. Applying even pressure at both corners of the card, insert the DPU into the PCI Express slot until firmly seated.

Do not use excessive force when seating the card, as this may damage the system or the DPU.
51