Specifications; Mbf2H332A-Aecot / Mbf2H332A-Aeeot / Mbf2H332A-Aenot Specifications - Nvidia BlueField-2 User Manual

Specifications


Power and airflow specifications are provided in NVIDIA BlueField-2 DPUs Electrical and Thermal Specifications document,
NVOnline following login.

The BlueField-2 DPU is designed and validated for operation in data-center servers and other large environments that guarantee proper power
supply and airflow conditions.
The DPU is not intended for installation on a desktop or a workstation. Moreover, installing the DPU in any system without proper power and
airflow levels can impact the DPU's functionality and potentially damage it. Failure to meet the environmental requirements listed in this user
manual may void the warranty.

Ensure your system supports the following system hardware and power supply requirements prior to installing your card.
HHHL DPUs
FHHL DPUs
MBF2H332A-AECOT / MBF2H332A-AEEOT / MBF2H332A-AENOT Specifications
BlueField-2
BlueField-2 SoC
• MBF2H332A-AECOT: Crypto Enabled, Secure Boot Enabled
• MBF2H332A-AEEOT: Crypto Enabled, Secure Boot Disabled
• MBF2H332A-AENOT: Crypto Disabled, Secure Boot Disabled
75W or greater system power supply through the PCIe x8 interface
E-Series DPUs: A maximum of 75W system power supply through the PCIe x16 interface.
P-Series DPUs: A minimum of 75W or greater system power supply through the PCIe x16 interface, and an additional
75W through the supplementary 6-pin ATX power supply connector.
P-Series - 8 Cores - 500MHz/2500MHz
which is available at
59