Setting The Mics To Record A Clear Stereo Sound (X-Y Position) - Tascam DR-07mkII Owner's Manual

If you open or close the microphone pair while
using the built-in stereo microphone and the
left-right channels does not suit the angle of
the microphone, a pop-up message appears
to ask whether you want to swap the left-right
channels of the microphone. (See "Microphone
position detection" on page 49.)
CAUTION
• Set the left-right channels of the built-in microphone to
L-R. When you are using the built-in microphone and the
setting is not L-R, appears on the Home Screen. (See
"Swapping the left-right channels of the built-in
microphone pair" on page 48.)
Setting the mics to record a clear
stereo sound (X-Y position)
Close the stereo microphone. (X-Y position)
Set this way, the microphone pair is close, and
recording is possible with a clear stereo field
with less phase difference.
If you open or close the microphone pair while
using the built-in stereo microphone and the
left-right channels does not suit the angle of
the microphone, a pop-up message appears
to ask whether you want to swap the left-right
channels of the microphone. (See "Microphone
position detection" on page 49.)
3–Preparation
TASCAM DR-07MKII
47