Microphone Position Detection - Tascam DR-07mkII Owner's Manual

4 Use the + button or - button to select
(highlight) or
L-R R-L
microphone pair's status.
5 Press the Á button to fix the setting, and to
return to the Home Screen.

Microphone position detection

The following pop-up message appears
automatically whenever the left microphone
is opened or closed and the left-right channels
does not suit the angle of the microphone. If
only the right microphone is opened or closed, it
does not appear.
depending on the
Press the Á button to change the setting.
Press the ( ) [ª] button to leave the
HOME
setting as it is.
NOTE
• When you change the microphone angle setting and the
pop-up message appears, you must press the
to change the L–R setting, press the
button to keep this setting as is, or restore the previous
microphone angle to close the pop-up message before
you can begin recording.
• The pop-up message does not appear if you change the
microphone position when recording. If necessary, use
the MIC LR SWAP setting by pressing the QUICK
button to switch the setting after change the setting to
recording standby mode by pressing the RECORD [
button. (see the previous page).
3–Preparation
Á
button
(HOME) [
º
TASCAM DR-07MKII
ª
]
]
49