Table of Contents
Advertisement
4 – Recording
Setting input monitoring for specific
channels
When the
on the
MODE
INPUT MONITOR
, input monitoring can be turned on/off for
Individual
specific channels individually or all at once.
1. Open the
INPUT MONITOR
operation procedures" on page 16.)
2. On the
INPUT MONITOR
monitoring mode to
Individual
Underneath the
item, the
MODE
appears.
3. Press the MULTI JOG dial to confirm and move the cursor to
the next item.
Use the .// [MARK .//] buttons to move the
cursor.
When the cursor is at ON or OFF, press the MULTI JOG dial to
open a confirmation pop-up message.
When the confirmation message is open, press the MULTI
JOG dial to set all channels at once.
Setting the first channel to be included when selecting a range
of channels at once
Options:
–
: First channel included when selecting a
CH01
CH63
range of channels at once
–
: Last channel included when selecting a
CH02
CH64
range of channels at once
/
: Input monitoring status for range of channels
OFF
ON
selected at once
4. By moving the cursor to the input monitoring indicator area,
you can set input monitoring for individual channels.
Press the MULTI JOG dial to enable/disable
the channel where the cursor is.
NOTE
You can also turn the MULTI JOG dial to select a channel.
Turn the MULTI JOG dial while pressing and holding the
SHIFT button to move the cursor by 4 channels at a time.
24
TASCAM DA-6400/DA-6400dp
screen is set to
screen. (See "Menu
screen, set the input
.
item
RANGE SELECT
monitoring
for
Making recording channel settings
1. Select the
REC FUNCTION
page to open the
FORMAT
"Menu operation procedures" on page 16.)
2. Set the recording function mode.
Options
(default): Recording is enabled for all channels
ALL ON
: Recording is disabled for all channels
ALL OFF
: Allow recording to be enabled/
Individual
disabled for specific channels individually or all at once
3. Confirm the setting and return to the Menu Screen.
Setting the record function for specific
channels
When the
on the
MODE
REC FUNCTION
, recording can be enabled/disabled for specific
Individual
channels individually or all at once.
1. Open the
REC FUNCTION
procedures" on page 16.)
2. Set the recording function mode on the
screen to
.
Individual
Underneath the
item, the
MODE
appears.
3. Press the MULTI JOG dial to confirm and move the cursor to
the next item.
Use the .// [MARK .//] buttons to move the
cursor.
When the cursor is at ON or OFF, press the MULTI JOG dial to
open a confirmation pop-up message.
When the confirmation message is open, press the MULTI
JOG dial to set all channels at once.
Setting the first channel to be included when selecting all
channels at once
item on the
REC FILE
screen. (See
REC FUNCTION
screen is set to
screen. (See "Menu operation
REC FUNCTION
item
RANGE SELECT
Advertisement
Table of Contents
