Tascam DR-07mkII Owner's Manual page 114

12–Messages
Message
MBR Error Init
CARD
Format Error
Format CARD
File Not Found
Make Sys File
Invalid SysFile
Make Sys File
Invalid Card
Change Card
Write Timeout
Card Full
Layer too Deep
114
TASCAM DR-07MKII
The card is not formatted properly or the formatting is broken. Change the card or
Á
press the button when this message appears to format the card in FAT format.
CAUTION: Execution of FAT formatting erases all data currently on the card
The FAT formatting of the card is abnormal or broken. This message also appears if
you FAT formatted the card using a computer connected by USB and if a new card is
inserted in the unit. Always use the DR-07MKII to conduct FAT formatting of cards to
be used with it. Change the card or press the
to format the card in FAT format.
CAUTION: Execution of FAT formatting erases all data currently on the card.
The system file is missing. This unit requires a system file for operation. When this
message appears, press the
The system file required to operate this unit is invalid. When this message appears,
press the Á button to automatically create a system file.
Something might be wrong with the card. Change the card.
Writing to the card timed out.
Backup files on the card to your computer, and format the card.
The card has no remaining capacity. Erase unnecessary files or move them to your
computer to make open space.
Folders can be created down to two layers. You cannot create a new folder inside the
current folder.
Meaning and response
Á button when this message appears
Á
button to automatically create a system file.
.