Recording Playback And Input Sounds Together (Overdubbing) - Tascam DR-07mkII Owner's Manual

4–Recording
NOTE
To avoid accidental recording of the noise from pressing the
RECORD [º] button, the start of recording is delayed by 0.3
second (fixed) after the RECORD [º] button is pressed. (REC
DELAY)
CAUTION
Noise may occur when recording with a microphone if the unit
is too close to the AC adaptor. In such a case, keep sufficient
distance between the AC adaptor and the unit.
Recording playback and input
sounds together (overdubbing)
By overdubbing, you can play an instrument or
sing as you play back a saved track and mix and
record both sounds in a new file.
NOTE
• You cannot overdub if input monitoring is OFF.
• The prerecording function is disabled if the input monitor
is ON for overdubbing.
60
TASCAM DR-07MKII
• Overdub recording is not possible when using the AUTO
REC function.
• When overdub recording, you cannot start new files
manually.
• You cannot pause during overdub recording. (You
cannot use the RECORD [
• The sampling frequency of the playback file is
regardless of the sampling frequency setting for overdub
recording.
• You cannot make an mp3 file when overdubbing a WAV
file with a sampling frequency of 96kHz.
º
] button.)
preserved