Table of Contents
Advertisement
6. On the General tab, deselect the Read-only checkbox to allow users to access the folder over the
network.
7. Select the Sharing tab and click the Advanced Sharing button.
Note: You need to be logged into Windows as an administrator to select the Advanced Sharing
button.
8. On the Advanced Sharing screen, select the Share this folder checkbox.
9. Click the Permissions button and select the following on the Share Permissions tab:
• Select Everyone under Group or user names.
• Select the checkbox in the Allow column for the Change setting.
10. Click OK to save the settings, then click OK again to close the Advanced Sharing window.
11. Select the Security tab and check that the Group or user names list at the top includes the current
computer user and the administrators who can now access the folder.
12. Select the Sharing tab again and write down the Network Path listed under Network File and Folder
Sharing at the top. This is the path you will register to your product's Contacts list so you can select it
for network scanning.
13. Click OK or Close.
Now you can register the folder path to your product's Contacts list.
Parent topic:
Registering Contacts for Network Folder or FTP Scanning - Web Config
You can register a list of contacts for scanning to a network folder or FTP server using Web Config and
your computer's internet browser.
Before you begin, print a network status sheet and locate the IP address for your product on the sheet.
Note: These instructions use Internet Explorer as an example browser.
1. Start Internet Explorer on a computer that is using the same network as your product.
2. Type your product's IP address into the address bar and press Enter.
3. Click Continue to this website (not recommended).
4. Click the Scan/Copy tab.
5. Click Contacts.
Setting Up and Scanning to a Network Folder or FTP Server
184
Advertisement
Table of Contents
