Table of Contents
Advertisement
Clearing the Internal Memory
Restoring Default Product Settings
Parent topic:
Checking Status Information
You can check information about the printer using the Web Config interface.
Note: Depending on the features of your product, not all of the options below may be available. Some
options are not available unless you are logged in to the Web Config interface.
1. Enter the IP address of the printer to access Web Config and log in as an administrator, if necessary.
2. Select the Status tab and choose one of the following options:
• Select Product Status to view information such as ink level and maintenance box status.
• Select Network Status to view network information such as the IP address and network
connection status.
• Select Usage Status to view information about the number of prints and historical information
about the product.
• Select Hardware Status to view information about the product functions.
• Select Job History to view information about the jobs completed on the product.
Parent topic:
Managing the Network Connection
You can check or update the network information for your product using the Web Config interface.
1. Enter the IP address of the product in a web browser and log in as an administrator.
2. Select the Network tab, then select Basic.
3. Check or update the settings as necessary.
4. Select Next to see a summary of the network settings.
5. Select OK to accept the changes.
Note: The network connection will be temporarily interrupted to enable the new settings.
Administering Your Product
Configuring Product Settings
320
Advertisement
Table of Contents
