Table of Contents
Advertisement
Setting
Subnet Mask
Default Gateway
DNS Server Setting
Primary DNS Server
Secondary DNS Server
DNS Host Name Setting
DNS Host Name
DNS Domain Name Setting
DNS Domain Name
Register the network interface
address to DNS
Proxy Server Setting
Proxy Server
Description
Displays the subnet mask. If you are manually entering the
subnet mask, enter it in the format xxx.xxx.xxx.xxx (where
xxx is a number between 0 and 255).
Displays the default gateway address. If you are manually
setting the default gateway, enter it in the format
xxx.xxx.xxx.xxx (where xxx is a number between 0 and 255).
Selects the DNS server setting. If the Obtain IP Address
setting is set to Manual, this setting is also set to Manual.
Enter the address of the primary DNS server in the format
xxx.xxx.xxx.xxx (where xxx is a number between 0 and 255).
Enter the address of the secondary DNS server in the format
xxx.xxx.xxx.xxx (where xxx is a number between 0 and 255).
Sets the DNS Host Name selection method
Displays the current DNS Host Name.
Sets the DNS Domain Name selection method
Specifies the DNS domain name. The name must conform to
the following format:
• Enter between 2 and 249 characters using only the
characters "A-Z", "a-z", "0-9", hyphen "-", and a period "."
• The first character cannot be a "0-9", hyphen "-", or a
period "."
• The last character cannot be a hyphen "-" or a period "."
• Each label in the domain name must be between 1 and 63
characters and separated by a period.
• The total number of characters in the host and domain
name must not exceed 251.
Allows you to register the host and domain names through a
DHCP server that supports Dynamic DNS
Enables the use of a proxy server
Specifies the name of the proxy server in either IPv4 or
FQDN format
322
Advertisement
Table of Contents
