Maintenance schedule
After the first 100 operating hours
Valve clearances. Check ...................................................................... not illustrated
l
l
l
l
l
1)
Concerns only double filters: Check the manometer and change filter if necessary, but
change filter at least every 1000 operating hours or at least once a year.
l
l
l
1)
This applies only if the cooling system is filled with an anti-corrosion mixture.
l
Fuel filters. Change ...................................................................................... page 51
l
l
l
l
Every 2000 operating hours
Injectors. Pressure test ......................................................................... not illustrated
Every 12 months
Turbocharger. Check ............................................................................ not illustrated
TAMD74A-B: Wastegate valve. Check ................................................. not illustrated
Engine and reverse gear. General check ............................................. not illustrated
Heat exchanger. Check / Clean ............................................................ not illustrated
Charge air cooler. Check / Clean .......................................................... not illustrated
Oil cooler (Reverse gear). Check / Clean ............................................. not illustrated
Impeller (Seawater pump). Check / Change ................................................. page 47
l
Impeller (Flush pump/Bilge pump). Check / Change ............................. not illustrated
l
Engine and reverse gear. Clean / Paint ................................................ not illustrated
l
30
1)
1)