Table of Contents
Advertisement
Control panel
Setting time and date
Current time is displayed in the information view,
which is opened by pushing the CHANGE VIEW but-
ton for one second.
To set time and/or date, push the LAMPTEST button
and hold it down while pushing the ACKNOWLEDGE
button. The year is marked. To set new year, use the
UP and DOWN buttons (
or
).
The LEFT and RIGHT buttons (
or
) are used for
choosing what field to mark and thereby enabling it
for change.
Seconds are set to 00 and the clock is started when
the LAMPTEST button is pushed. If a minute passes,
in timeset mode, and the buttons are not pushed, the
control unit will terminate the clock setting process.
17
Advertisement
Chapters
Table of Contents
