NI 6032E Pinout
Note
Some hardware accessories may not yet reflect the NI-DAQmx terminal names. If
you are using an E Series device in Traditional NI-DAQ (Legacy), refer to Table 1-5,
Terminal Name
© National Instruments Corporation
For a detailed description of each signal, refer to the
Descriptions
section of Chapter 1,
Figure A-45 shows the NI 6032E device pinout.
Equivalents, for the Traditional NI-DAQ (Legacy) signal names.
Appendix A
DAQ System
A-51
Device-Specific Information
I/O Connector Signal
Overview.
E Series User Manual