Table of Contents
Advertisement
Control panel
Immediately after the appliance is connected to electrical mains,
•
all displays will light up briefly. Your appliance is then ready for use.
The induction hob is equipped with electronic touch control
•
sensors, which are operated by touching with a finger for at least 1
second.
Touching of a sensor is accompanied by a beep to acknowledge.
•
Do not place any objects on the sensors of the control
panel. Make sure that cookware is not placed beyond the
outline of the cooking zone. If you place cookware too close
to the control panel or you cover any sensors, the hob will
automatically turn off for safety.
Turn on the appliance
Touch and hold the on/off
Hob indicates correct operation (active) when "00" is shown on the
cooking zone displays.
If you do not set the desired heat setting of the cooking zone
within 15 seconds of activating the appliance, it will turn off
automatically.
Activate cooking zone and set the heat setting
Turn on the hob with the
•
Place the cookware on the desired cooking zone.
•
The cookware will be automatically detected and the relevant
•
display will show flashing "00." This means that the selected
cooking zone is active and you can set the power.
sensor for at least 3 seconds. The
sensor.
17
Advertisement
Table of Contents
