Table of Contents
Advertisement
You will hear a beep and the selected maximum power setting
will flash several times on the display and then the appliance
will turn off. Now your operating induction hob will not exceed
the total maximum power you selected.
If you do not confirm the selected maximum power setting,
your induction hob will turn off and operate with the previously
selected maximum power or with the default power of 2.8kW.
When you select heat setting on individual cooking zones, the Power
Management circuit will ensure that the selected total maximum power
is not exceeded. Any setting that would cause the total maximum
power to be exceeded will be unavailable to the user. The Power
Management circuit may disable a cooking zone if using it would
cause the total maximum power of the appliance to be exceeded.
Hob Protection
If the hob has been installed correctly and is used properly, any pro-
tective devices are rarely required.
Fan: Protects and cools controls and power components. It can oper-
ate at two different speeds and is activated automatically. Fan runs
until the electronic system has sufficiently cooled down regardless of
the appliance or the cooking zones being turned on or off.
Temperature sensor: Temperature of electronic circuits is continuously
monitored by a temperature sensor. If temperature is raised beyond
a safe level, this protection system will reduce cooking zone heat
setting or shut down the cooking zones adjacent to the overheated
electronic circuits.
12
Advertisement
Table of Contents
