Juniper EX2300 Quick Start Manual page 12

11. Configure the default gateway for the management network.
{master:0}[edit]
root# set routing-options static route 0/0
12. Configure the SSH service. By default the root user cannot login remotely. In this step you enable
the SSH service and also enable root login via SSH.
{master:0}[edit]
root# set system services ssh root-login allow
13. Optional: Configure the IP address of a DNS server.
{master:0}[edit]
root# set system name-server
14. Optional: Configure an SNMP read community.
{master:0}[edit]
root# set snmp community
15. Optional: Continue customizing the configuration using the CLI. See the
Junos OS for more details.
16. Commit the configuration to activate it on the switch.
{master:0}[edit]
root# commit
17. When you've finished configuring the switch, exit configuration mode.
{master:0}[edit]
root# exit
{master:0}
name
root@
next-hop address
address
community_name
Getting Started Guide for
10